BenQ XL2410T

BenQ's XL2410T is excellent value, especially considering it runs at 120Hz. With silky smooth frame rates, low response time and guaranteed zero input lag, this is a great gaming monitor. If you're in a colour critical environment though, you should look elsewhere, preferably for something with an IPS screen.


8.5
CNET Rating

About The Author

CNET Editor

Craig was sucked into the endless vortex of tech at an early age, only to be spat back out babbling things like "phase-locked-loop crystal oscillators!". Mostly this receives a pat on the head from the listener, followed closely by a question about what laptop they should buy.


Gaming monitors are ever changing in their definition. They used to be monitors with a low response time, until that metric became mostly a non-concern. Then they were all about (and arguably still about) input lag, although all except the biggest monitors seem to have overcome that hurdle as well. The new battle ground? 120Hz refresh, with a healthy dose of 3D compatibility on the side. Just make sure you use a dual-link DVI cable for 120Hz — a standard cable won't have the bandwidth to drive it, and things will look corrupted.

It must be said that gaming at 120Hz is a much smoother and more impressive experience than 60Hz, and it's easy to see why gamers love it. 3D gaming with glasses, though? Complete bunk. Those who grab the XL2410T won't be buying the monitor to be stereoscopically enlightened, but rather to make the most of the silky smooth frame rate that their insanely overpowered rig can shoot out. Goodbye 60Hz, hello new world order.

How else do we know it's a gaming monitor? Well, there are two serious gentlemen on the front crossing their arms in sponsored gear with signatures — that's the gamer's pose, if you didn't know. There's no other hint as to who these people are, you're simply expected to be up on your clan lore. Thankfully, we have the internet.

BenQ XL2410T front

Stylin'
(Credit: Craig Simms/CBS Interactive)

Specs at a glance

Size 23.6 inches
Resolution 1920x1080
Aspect ratio 16:9
Pixel pitch 0.272
Panel technology TN
Viewing angles
(10:1 contrast)
H: 170°
V: 160°
Response time 2ms G2G
Max vertical refresh 120Hz
Connections VGA, DVI, HDMI, 3.5mm headphone jack (for HDMI/DisplayPort audio-out only)
Accessories VGA, DVI cables

Stand and ergonomics

BenQ offers a stand that hits some incredible height. At its bottom level, the highest point of the base sits at 10.5cm from the table, at the highest level, it's 23.5cm, which is great for tall people (or people who do their work standing). The stand also offers tilt, pivot and rotate functions, and has a clasp at the back of the neck for cable management. This clasp moves when you adjust the height, though, so you will need some slack in your cables, something that may not appeal to the neat freaks.

BenQ XL2410T stand

BenQ's stand performs all the functions we'd hope it to, and has an impressive height adjustment.
(Credit: Craig Simms/CBS Interactive)

Connections

BenQ XL2410T inputs

Power, DVI, VGA, HDMI. You can see a 3.5mm audio jack on the side, which will power your headphones if you have audio coming over HDMI.
(Credit: Craig Simms/CBS Interactive)

Buttons and on-screen display (OSD)

BenQ XL2410T buttons

The buttons aren't that helpful thanks to their placement.
(Credit: Craig Simms/CBS Interactive)

As usual, BenQ fails to put the buttons on the front. These ones are mounted on the bottom of the monitor, which makes them clumsy to use in the light and near impossible to use in the dark.

BenQ XL2410T OSD

Once you manage to get around the awful button placement, BenQ's OSD is easy enough to navigate.
(Credit: Craig Simms/CBS Interactive)

As usual there are preset image profiles on the XL2410T, covering standard, sRGB, Eco, Photo and Movie. But there are a few custom ones here, too: User-game 1 and 2, and FPS. The first two store custom colour profiles, but something else is at play here: colours and gradients never looked natural, no matter how long we played. The display was also over-sharp, something that couldn't be adjusted in the User-game modes. We'd suggest sticking to the standard profile and using a custom colour temperature.

While FPS mode supposedly "provides gamers with a totally accurate representation of each scene in a virtual world, so they're never put at a disadvantage in a key encounter with the enemy because of hardware shortcomings".

Huh? Separate the market droid speak, and it's just another preset profile, supposedly better suited to FPS. As always, we'd recommend you ignore it, set it to standard and do your own tweaking.

Scaling options are impressive, to a degree that we've not seen on a monitor before. Full, aspect and 1:1 are there, and you can turn overscan on and off if you're using HDMI. There are a few more settings that allow you to scale the image to a 17- and 19-inch 4:3 monitor size, as well as a 19- and 22-inch wide modes.

Also excellent is the ability to turn off HDMI auto-switch. For those not in the loop, this feature will automatically switch to your HDMI input if it's live when your DVI input turns off (that is, if you have something connected to it like a running PS3). It's surely aimed at convenience, but it often ends up as anything but, with the monitor switching every time your PC goes to sleep and you having to switch it back manually. It is, consequently, also a needless draw on power. Kudos to BenQ for giving us the power to turn it off.

Picture by picture (PBP) mode is here, with the ability to show not only VGA by HDMI, but HDMI by DVI — the first time we've seen this combination. Things end up squished in the wrong aspect ratio and the scaling is pretty brutal, but we find PBP to be more useful than Picture In Picture (PIP), purely on account of the size of the windows.

More tweaking is available: BenQ has provided something called Instant Mode, which disables processing on the image and should help to minimise input lag. The rest of the OSD is fairly standard, but the tweaks BenQ has made are impressive.

Performance

Lagom.nl LCD tests
After calibrating to a target brightness of 140cd/m² with an X-Rite i1Display 2, Eye-One Match 3 and tweaking with HCFR, the XL2410T was run through the Lagom.nl LCD tests.

Image tests
Contrast Sharpness Gamma Black level White saturation Gradient
Pass Pass Pass Can't differentiate 1 and 2 grey from black Can't differentiate 253, 254 grey from white Gradient crushes too quickly at the extremes

Interestingly, when properly calibrated, you can't differentiate the lighter end of the gradient from white, and the darker from black; BenQ seemingly crushes the tones for more vibrancy. Significant adjustment of brightness, contrast or gamma was required to address this, which threw out all other colours.

Inversion pixel walk tests
Test 1 Test 2a Test 2b Test 3 Test 4a Test 4b Test 5 Test 6a Test 6b Test 7a Test 7b
Pass Flicker Upward scrolling High level noise, grid affected by overlay Flicker Upward scrolling Pass Pass Pass Pass Pass

Most monitors fail from one up to four of the pixel walk tests; however, the BenQ tips the scales at five. We'd like to see a little more control here.

Input lag
Measured against a Samsung SyncMaster 975p CRT, and using a Canon 40D set to a shutter speed of 1/320, an average of over 60 photographs was taken using StoppUhr. The XL2410T was set into 120Hz and had Instant Mode on: it had a lag time of less than 1ms, making it perfect for competitive gaming.

Colour accuracy
ΔE is the measurement of how far a measured colour deviates from its expected value, allowing us to determine the colour accuracy of a monitor. While a ΔE value of one is considered perceivable, as long as it's less than three, the shift shouldn't be too obvious. HCFR was used to determine ΔE for the monitor, in tandem with an X-Rite i1Display 2.

Measured levels (Standard mode)
Contrast ratio 1009:1
Black level (cd/m²) 0.301
White level (cd/m²) 303.795
Gamma 2.12
Greyscale ΔE
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
83.9 10.2 7.1 6.9 6.4 6.6 6.3 6.4 6.2 6.3 5.6
Colour ΔE
Red Green Blue Yellow Cyan Magenta
15.0 7.9 4.3 7.2 2.6 12.8

BenQ XL2410T CIE chart

While it's not great, this isn't bad for a non-calibrated screen. Still, we must have better.
(Screenshot by CBS Interactive)

This actually isn't terrible for an out-of-the-box result, the colours especially are better than usual. Of course, there's still colour shifts going on here and greys aren't great, so let's see if we can go one step better.

Measured levels
Contrast ratio 885:1
Black level (cd/m²) 0.162
White level (cd/m²) 143.433
Gamma 2.26
Greyscale ΔE
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
64.6 13.7 3.4 1.3 1.0 1.2 1.1 0.7 0.5 0.8 1.2
Colour ΔE (compared to sRGB)
Red Green Blue Yellow Cyan Magenta
9.4 6.6 5.1 6.9 5.6 7.9

BenQ XL2410T CIE chart

Aha!
(Screenshot by CBS Interactive)

That's about the limit of what we can do with the controls we're provided — for a non-professional monitor, the XL2410T does well.

HDMI performance
While a monitor might have an HDMI port, there's no guarantee that it'll display images as expected. We hooked up a PlayStation 3 and checked for 24p capability as well as judder, and ran the HQV Blu-ray test to see how well it coped with an interlaced source and noise.

24p capable Understands YUV Mission Impossible III
Scene 11 judder test
Mission Impossible III
Scene 14 judder test
Yes Yes Slight judder Judder
HQV noise
reduction
score
HQV video
resolution loss
score
HQV jaggies
score
HQV film
resolution loss
score
HQV film
resolution loss — stadium
score
Total score
out of 100
10 20 20 0 0 50

While it is affected by Judder, the XL2410T does surprisingly well with interlaced and video content, as shown by its HQV results.

Viewing angles
Viewing angles were taken with a Canon 40D in spot-metering mode, with only shutter time adjusted to obtain a good exposure.

BenQ XL2410T viewing angles

The BenQ's TN panel shows in its less than optimal viewing angles, especially on the verticals where the colour inverts.
(Credit: Craig Simms/CBS Interactive)

Light bleed
The XL2410T is affected by very noticeable light bleed all around the monitor, with greater influence on the verticals than the horizontal. Light bleed is most irritating on a dark screen, and BenQ's bleed isn't great.

It's important to note that the effects of light bleed will likely change from monitor to monitor, regardless of make.

Power consumption
We measured power consumption using a Jaycar mains digital power meter. It's important to note here that, due to limitations of the meter, measurements are limited to values of 1W and greater, and are reported in 1W increments.

All measurements, screen brightness and contrast were set to 100 per cent, and a test image displayed.

Juice Box
Maximum power draw 27W
Power-saving mode <1W
Off <1W

BenQ maintains its power-conscious position — it's a shame it hasn't included its tech that auto-switches off the monitor when a user steps away.

Warranty

The XL2410T is covered by BenQ's fantastic four-year, zero-dead pixel, on-site pickup warranty.

Conclusion

BenQ's XL2410T is excellent value, especially considering it runs at 120Hz. If you're after silky smooth frame rates, low response time, guaranteed zero input lag and don't really care about image quality and control, it excels fantastically. If you need better colour and image display, though, you should look elsewhere, preferably for something with an IPS screen.

Previous Story

Asus PA246

Computers
Next Story

Apple Thunderbolt Display



Add Your Review 1


* Below fields optional


Post comment as
 

"BenQ please note: Need Bigger Monitor"

Yoda7 posted a comment   
Australia

Now I'd like to see BenQ make a 28 to 30 inch monitor with 2560 x 1440 resolution and 2ms response time.
This would be a general purpose monitor so it doesn't have to have an IPS panel nor 120Hz (although it that be cool).




Sponsored Links
CNET's latest

User Reviews / Comments  BenQ XL2410T

  • Yoda7

    Yoda7

    "Now I'd like to see BenQ make a 28 to 30 inch monitor with 2560 x 1440 resolution and 2ms response time.
    This would be a general purpose monitor so it doesn't have to have an IPS panel nor 12..."

CNET Speedtest

Recently Viewed Products