Unlike many of its competitors, Netgear tweaked and polished its firmware before it released its first 802.11g draft-compliant product. We think the WG602 represents a viable solution for any home, small office, or hot-spot location. Its reasonable price and great performance make it one of the best consumer-end access points we've tested.
Design
You don't need to know much about networking to set up the Netgear WG602 54Mbps wireless access point. Just plug it into your LAN using the included Ethernet cable and insert the accompanying GearBox CD into any computer on the network. A browser window automatically launches and offers a wealth of information, including an interactive install assistant. This animated guide leads you through the setup process and even provides boxes to check as you complete each step. The GearBox CD also contains a user guide and a PC networking tutorial, as well as direct links to the access point's Web-based configuration tool and Netgear's Web site. Together, the CD and user manual make setup and configuration as foolproof as any networking product we've tested.
Once you get all of the hardware and the cables connected, you can configure the access point using the easy-to-navigate Web-based configuration tool, which presents you with a split screen. On the right-hand side of the screen, you'll find a brief definition and explanation of each of the settings on every page. This unique feature sets Netgear apart from its competitors and spares you from flipping through the manual every five seconds.
Features
Like all access points, the Netgear WG602 54Mbps wireless access point lacks most of the bells and whistles you'll find on today's wireless routers. That's because access points play the role of a hub and not that of a firewall or a gateway. In other words, an access point lets you add wireless connectivity to an existing Ethernet or power-line network.
Still, the WG602 offers a few interesting features. For example, it comes with a handy rubber stand for vertical placement, while two slots on the bottom let you easily mount the device on a wall or a ceiling. There's also a reset button that lets you quickly return the access point to its default settings should you forget your password. But the WG602's detachable antenna on the back panel really distinguishes it from some of its competitors. You can remove the 2dBi omnidirectional antenna to expose a standard, reverse SMA connector. And while the WG602 offered excellent range in CNET Labs' tests with its default antenna, the external connector lets you screw on a directional antenna and extend your range into any hard-to-reach area.
Like most 802.11x-based gear on the market today, the WG602 comes up a bit short on security. It offers the standard 64- and 128-bit flavors of WEP encryption, but it lacks the dynamic keying mechanism offered by Wi-Fi Protected Access (WPA), and the authentication capabilities of 802.11x. On the upside, Netgear says that the device will support both WPA and 802.1x with a future firmware upgrade. You can also deny or allow network access to wireless computers based on its MAC address, as well as adjust the beacon interval, the RTS threshold, the fragmentation length, and the DTIM interval. Unfortunately, the WG602 lacks the bridging capabilities found on the Apple AirPort Extreme, which let you extend a network without Ethernet wiring or connect two wireless LANs.
Performance
The Netgear WG602 54Mbps wireless access point beat the competition in both g-only and mixed-mode (802.11b and 802.11g) environments. At 1.5m, its maximum throughput clocked in at 20Mbps, a tad slower than the best 802.11a access point we've tested, but fast enough to satisfy 802.11g's promise of comparable speeds. It also makes good on another promise: range. In CNET Labs' tests, the WG602 delivered 12.3Mbps at 22.8m, about three times the throughput of an 802.11b device sitting right next to the access point.
In mixed mode, throughput dropped down to mostly 802.11b levels, with an occasional short-lived 802.11g burst in speed. At the fringes of its range, the WG602 favored the transmissions of our 802.11b client, running the 802.11g transmissions into the ground. Still, we achieved good range in both g-only and mixed-mode environments.
Add Your Review 5