Perfectly calibrate your LCD TV Want to adjust your flat-panel TV to get the best image for your DVDs? Here's how.

Estimated time required: 3 hours
Estimated cost: AU$40 and up



Step 1: Getting started
Step 2: What you'll need
Step 3: Create proper room lighting
Step 4: Dim the backlight
Step 5: Control brightness and contrast
Step 6: Set your colour correctly
Step 7: Further fine-tuning

Step 1: Getting started
So you've finally stepped up and ditched your bulky tube television for a sleek new flat-panel LCD set. Problem is, like most televisions, LCDs are preconfigured to make an impact on the sales floor of your local electronics superstore, not in your living room. These default settings are usually way too bright and garish to accurately represent real life. Here's how to properly set the basic picture controls available on most LCD sets to maximise your home-theatre viewing pleasure.
Back to top
Step 2: What you'll need
Before you even get started with this project, we recommend that you have the following:
  • An LCD flat-panel TV
  • A "daylight" lightbulb (which glows at about 6,500 degrees Kelvin)
  • A home-theatre setup DVD, such as Sound & Vision Home Theater Tune-Up or Digital Video Essentials
Back to top
Step 3: Create proper room lighting
Because most people turn down the lights to watch a movie, our recommendations are designed to deliver a better DVD picture in rooms with controlled lighting. Unless you're sitting at the minimum viewing distance for your LCD television's size (see the chart), you shouldn't watch movies in complete darkness because it can cause eyestrain. The ideal setup is to place a dim light directly behind the television and leave the rest of the room dark. You should also try to prevent any light in the room from reflecting off the LCD screen, as glare will hamper image fidelity.

Tip: Look for special "daylight" bulbs that glow at 6,500 degrees Kelvin. This is the standard colour temperature that most producers use when creating movies and TV shows.

Wide-screen TV viewing distances
Your television should deliver the right-size picture for where you sit relative to the screen. Sitting closer to a smaller television means you won't have to splurge on a big screen. But if you sit too close, the picture quality will be substandard. Sit too far away, and you won't have an immersive experience.

16:9 TV diagonal screen size Minimum distance (metres) Maximum distance (metres)
26 inches (66cm) 1 2
30 inches (76cm) 1.2 2.3
34 inches (86cm) 1.3 2.6
42 inches (106cm) 1.6 3.2
47 inches (120cm) 1.8 3.6
Back to top
Step 4: Dim the backlight
By design, LCD sets have a bright fluorescent light behind their LCD panel. Called the backlight, this light source affects the brightness of the entire screen. Some LCDs have a dedicated backlight control. In a darkened room with carefully placed lighting, we recommend you lower this setting all the way before you begin adjusting the brightness and contrast. You can always raise it later if it proves too dim.

Tip: LCDs have smaller viewing angles compared with other TV types. You should always try to sit at eye level and directly in front of the screen when viewing and adjusting the image.

Back to top
Step 5: Control brightness and contrast

Use the brightness control to balance deep-black letterboxing bars with details in shadows.
Technically called black level, an LCD's brightness control actually adjusts how dark the black sections of the picture appear. Excessive brightness can result in a two-dimensional, washed-out look with reduced colour saturation. Images with brightness set too low tend to lose detail in shadows, and distinctions between dark areas disappear in pools of black.

Play a DVD that has letterboxing bars above and below the image and find a scene that has a roughly equal amount of light and dark material -- preferably with some details in the shadows. Turn up the brightness control all the way, then decrease it until the letterboxing bars begin to appear as close to black as possible. If you notice a loss of shadow detail -- for example, when people's eyes disappear into the depths under their brows -- then you've set brightness too low. You may also have to adjust the backlight and contrast controls to recapture lost shadow detail.


Starting at the full-contrast setting, reduce the contrast until details are visible in light-coloured objects.
Now set the contrast. High contrast can obscure details and distort lines in the image, causing eyestrain in dim rooms. Setting contrast too low robs the image of impact. Display a still image from a DVD of a white object with some visible details, such as someone wearing a white button-up shirt. Adjust the control up all the way, then reduce it until you can make out all the details in the white areas, such as the buttons and creases in the shirt.

Tip: In general, LCD sets can handle a higher contrast setting than other types of televisions. You can often set it as high as 80 percent without obscuring detail.

Back to top
Step 6: Set your colour correctly

Raise the colour control all the way, then ease it down to the most accurate level.
Tuning your colour setting, or saturation, has a drastic effect on overall display quality. When there's too much colour, the image looks garish and unrealistic. This distortion is most noticeable with reds, which are often accentuated or pushed by the television's colour decoder. If there is too little colour, the picture appears drab and muted. Setting colour to zero results in a completely black-and-white image. Before you start fiddling with the colour, find your LCD's colour-temperature control. This important feature affects the set's entire palette of hues. Select the Warm or low option, which should come closest to the government's NTSC standard of 6,500 degrees Kelvin. If the picture looks too red for your taste, try the medium setting, though that often gives results that are way too blue.

Now find an image of someone with light, delicate skin tones, preferably a close-up of a face, on a DVD. Turn up the colour control until it looks like the person has terrible sunburn, then reduce it until the skin looks natural, without too much red. If the rest of the colours look washed out, you can increase colour slightly at the expense of accurate skin tones.

Tip: Generally, DVD images are best when proprietary processing modes such as autocolour, auto flesh tone, autocontrast, and noise reduction are turned off.

Back to top
Step 7: Further fine-tuning
For basic calibration, we recommend that you put the tint setting on your LCD television at the midway point. Another important control is the sharpness level. This function adds artificial edges to objects on the screen.

Though the feature can sometimes help with soft cable signals, it almost always mars the already sharp image from a DVD. When watching high-quality movies, we recommend reducing the sharpness to zero unless you detect visible softening along the edges of text. (Use a DVD's menu screen to test this.)

Adjusting your LCD with the quick tips we've just mentioned will yield good results, but you can do even better by investing in a home-theatre setup DVD. These store-bought discs offer tons of in-depth advice and calibration exercises for televisions and your entire home-theatre setup. If you're game to devote the time these DVDs require, they're excellent tools. We especially like Sound & Vision Home theater Tune-Up (~AU$30), great for beginners looking for a quick way to tune up their systems, and Digital Video Essentials (~AU$30), well suited for experienced home-theatre fanatics.

Like this article? Click below to send it to your mobile for free!

Pablo
11/08/2005 05:38 AM

I recently bought a 20" LG Flatron LCD TV, and connected the DVD player to the TV with the RGB or composite cables... the image looks great, really sharp and beautiful.... but green. The TV settings don't allow me to fine tune either "color" nor "tint", so I'm stuck with a "matrix-look" for all my movies. The TV allows me to configure "tint" and "color" settings while in "TV" and "Video" signals, but if I select "Composite" signal, the menu only allows me to adjust "contrast" and "brightness". Is there a way to adjust the color and tint while in "Composite"? The model number is RM-20LA70 Thanks!

Report offensive content

GRAW
08/10/2006 03:30 AM

That happens to my Xbox every once in a while. it seems to have something to do with the output source. In your case a dvd player. It normally fixes itself when I reset. Try unplugging everything then connect video cables then power and test. otherwise try a different dvd player.

Report offensive content

CAV
14/09/2007 07:56 AM

I just purchased an LCD Samsung 46-inch LNT4665f. Can someone provide me the settings used for a great picture.

Report offensive content

Connie
18/10/2007 02:00 PM

"K" is stuck on my sons sharp aquous lcd tv he just bought. Anyone know how to make the "K" go away? It is a "K" in a green square in the corner of the screen?

Report offensive content

Galadan
28/10/2007 11:45 AM

I'm having the same problem as Connie, does anyone have any suggestions?

Report offensive content

Raistlin
20/02/2008 06:16 AM

On the Sharp tv hold down the source button and volume down on the top panel while you switch the tv on to remove the K

Report offensive content

Marker
26/02/2008 01:11 PM

I have the Samsung model LNT 4665F and have received a warranty offer for 1-5 years. Is any one out there really buying $855.00 worth of coverage on this TV? Seems mighty steep. has anyone had any big problems with this TV set?

Report offensive content

Alex
26/03/2008 04:49 AM

hi, i have a samsung 82 inch, plz telll me the best settings for best picture!!!

Report offensive content

docjtr1
28/08/2008 09:37 AM

For the daylight at 6500 degrees kelvin, how many watts is ideal? Where do we find this? Should we point the light to the back of the LCD or to the wall behind it?

Report offensive content

edward1022
10/10/2008 10:49 PM

I just bought a samsung 46in 120mhz 630 model . does anyone have the correct colour settings for this tv. The model number is Ln46a630. I greatly appreciate your time for sending this to me

Report offensive content

  • Leave a comment

All fields marked with * are required

What do you think

Your e-mail will not be displayed

You must read and type the 6 chars within 0..9 and A..F

You must read and type the 6 chars.


  • Philips SoundBar HTS8140

  • Televisions go greener, thinner, and wireless at Ceatec

  • Sony Bravia KDL-46XBR45

  • OLED, 3D displaying the future

  • Samsung LA46A850

  • Panasonic's connected-home concept at Ceatec

  • Sony Bravia ZX1

  • Panasonic still cautious on OLED TVs

  • Oi!: Poll: Is Top Gear Australia in with the sharks already?

More articles »

Product finder

  • Philips SoundBar HTS8140

    Philips SoundBar HTS8140

    If you're looking for a discrete budget system as equally at home with music as it is with movies then they don't come much better than the Philips SoundBar HTS8140.

  • Sony Bravia KDL-46XBR45

    Sony Bravia KDL-46XBR45

    The Sony Bravia 46-inch XBR45 is a 1080p television which features LED backlighting and streaming media capabilities.

  • Samsung LA46A850

    Samsung LA46A850

    The Samsung LA46A850 is packed with features and stylish looks, but it's stuck between two other ranges which appear to offer better bang for buck.

  • Sony Bravia ZX1

    Sony Bravia ZX1

    The Sony ZX1 is the "world's thinnest" 40-inch LCD and comes with a wireless media box. Meanwhile, LED backlighting should provide this television with an impressive picture.

  • Panasonic Viera TX-37LZD800A

    Panasonic Viera TX-37LZD800A

    The Panasonic Viera TX-37LZD800A is a very capable telly and is ideally suited to wide rooms due to its excellent viewing angles.

More reviews »

Membership benefits

Create wishlists

Create wishlists

See a product on CNET.com.au that you want? Add it to your wishlist and send a hint to your friends and family. Sign up for a free CNET.com.au membership now!